Equipment & Capabilities at Ohio Valley Manufacturing

4000 Ton Danly

4000 Ton Danly: Press #7

This press is equipped with a knockout system.

Bed size: 84" x 236"

Stroke: 20 inches

Press speed: 10 to 25 strokes per minute

Shut height: 30" to 40"

Pass Line: 20"

Air Cushions: No

Windows (entry and exit): 86 inches wide, 62 inches tall

T-slots: JIC on 6 inch centers, bed and ram

Feed line: .125 - .500 x 72" | .625 x 48"

Arbor Spec: 50,000

3000 Ton Danly: 3000 (Press #9)

3000 Ton Danly: Press #9

This press is equipped with a knockout system.

Bed size: 120" x 96"

Stroke: 12"

Press speed: 10 to 22 strokes per minute

Shut height: 26" to 36"

Pass Line: 20"

Air Cushions: No

Windows (entry and exit): 72 inches wide, 30 inches tall

T-slots: 6"

Feed line: .250 - .500 x 16" to 68" | .625 x 48"

Arbor Spec: 50,000

1800 Ton Verson: Press #3

1800 Ton Verson: Press #3

This press is equipped with a knockout system.

Bed size: 312 x 72

Stroke: 16 inches

Press speed: 10 to 25 strokes per minute

Shut height: 30 minimum, 42 maximum

Pass line: 30 inches

Air Cushions: No

Windows (entry and exit): 72 inches wide, 48 inches tall

T-slots: JIC on 6 inch centers, bed and ram

Feed line: .040 to .250 gauge by 60 inch wide, will run .312 gauge up to 30 inches wide

Arbor Spec: 30,000

1800 Ton Verson: Press #6

1800 Ton Verson: Press #6

This press is equipped with a knockout system.

Bed size: 312 x 72

Stroke: 16 inches

Press speed: 10 to 25 strokes per minute

Shut height: 30 minimum, 42 maximum

Pass line: 20 inches

Air Cushions: No

Windows (entry and exit): 72 inches wide, 48 inches tall

T-slots: JIC on 6 inch centers, bed and ram

Feed line: .040 to .250 gauge by 60 inch wide, will run .312 gauge up to 30 inches wide

Arbor Spec: 50,000

1250 Ton Danly: Press #1

1250 Ton Danly: Press #1

This press is equipped with a knockout system.

Bed size: 96 x 60

Stroke: 16 inches

Press speed: 10 to 25 strokes per minute

Shut height: 28.5 minimum, 39 maximum

Pass line: 18 inches

Windows (entry and exit): 72 inches wide, 30 inches tall

T-slots: JIC on 6 inch centers, bed and ramv

Feed line: .040 to .250 gauge by 60 in. wide, .312 gauge up to 36 in. wide and .375 up to 16 in. wide

Arbor Spec: 40,000

800 Ton Verson: Press #4

800 Ton Verson: Press #4

This press is equipped with two 42"x 48" air cushions, 59.5 ton capacity each, 8" stroke.

This press is equipped with a knockout system.

Bed size: 108 x 48

Stroke: 24 inches

Press speed: 20 strokes per minute

Shut height: 32 minimum 48 maximum

Pass line: 20 inches

Windows (entry and exit): 68 inches wide 36 inches tall

T-slots: JIC on 6 inch centers, bed and ram

Feed line: .187 gauge by 48 inch wide, will run .250 gauge up to 24 inches wide

Arbor Spec: 50,000

800 Ton Verson: Press #5

800 Ton Verson: Press #5

This press is equipped with a knockout system. Bed size: 108 x 48

Stroke: 24 inches

Press speed: 20 strokes per minute

Shut height: 32 minimum, 48 maximum

Pass line: 20 inches

Windows (entry and exit): 68 inches wide, 36 inches tall

T-slots: JIC on 6 inch centers, bed and ram

Feed line: .187 gauge by 42 inch wide, will run .250 gauge up to 24 inches wide

Arbor Spec: 50,000

800 Ton Bliss: Press #2

800 Ton Bliss: Press #2

Bed size: 142 x 84

Stroke: 12 inches

Press speed: 10 to 40 strokes per minute

Shut height: 34" minimum, 44" maximum

Pass line: 20 inches

Windows (entry and exit): 68 inches wide, 36 inches tall

T-slots: JIC on 6 inch centers, bed and ram

Feed line: .040 to .165 gauge by 60" wide | .250 gauge by 36" wide

Arbor Spec: 40,000

800 Ton Verson: 800D Press #8

800 Ton Verson: 800D Press #8

This press is equipped with two 44"x 37 1/4" air cushions, 57.3 ton capacity each, 8" stroke.

Bed size: 108 x 60

Stroke: 16 inches

Press speed: 10 to 30 strokes per minute

Shut height: 30" minimum, 40" maximum

Pass line: 20 inches

Windows (entry and exit): 42 inches wide, 30 inches tall

T-slots: JIC on 6 inch centers, bed and ram

250 Ton Niagara: Press #0

250 Ton Niagara: Press # 0

Bed size: 48 x 42

Stroke: 6 inches

Press speed: 20 to 60 strokes per minute

Shut height: 14 minimum, 20 maximum

Pass line: 12 inches

Windows: 24 inches wide, 20 inches tall

T-slots: JIC on 6 inch centers, bed and ram

Feed line: .187 gauge by 24 inch wide

Weld Cell #1

Weld Cell #1

5 Gun Projection Welding Machine

3 Dengensha Nut Feeders

3 150 FVA Transformers

Weld Cell #2

Weld Cell #2

Motoman Arc World II Weld Cell

SK 6 6 axis Robot

Motoarc 350I Welder

Turntable

Hammerle Leveling Machine

Hammerle Leveling Machine

Can level multiple grades of steel, stainless steel, and aluminum from 0.020" up to 0.5" thick

Can roll blanks to within 0.005" flat

Uses 19 rollers to process blanks up to 29” wide with a minimum length of 4”

Fabricated to ISO 9001:2008 standards

Back to Top