Please e-mail your interest or resume to Becky Meade (becky.meade@ohiovalleymfg.com) & Michelle Dudley (michelle.dudley@ohiovalleymfg.com).

  • Tool & Die
    • Job Requirements: Must be a current Tool & Die Journeyman. Must be able to lift 65lbs.
    • Available Shifts:
      • 2nd Shift: 2:00pm – 10:00pm (Monday – Friday)
      • 3rd Shift: 10:00pm – 6:00am (Sunday – Thursday)
      • Possible overtime of 8 hour shifts

 

  • Wire EDM Operator
    • Job Requirements: Must be able to read blueprints. Auto Cad Experience required.  Must be able to lift 65lbs.
    • Previous Experience Required.
    • Available Shifts:
      • 2nd Shift: 2:00pm-10:00pm (Monday – Friday)
      • Must be available for training on other shifts
      • Possible overtime of 8 hour shifts

 

  • Manual Machinist
    • Job Requirements: Setup and operate manual milling, manual lathes, grinders, and drilling. Maintain safe operations by following all safety procedures and regulations.  Maintains and cleans equipment as required.  Uses gauges and measuring instruments to meet tolerance requirements.  All other duties as assigned.  Must be able to lift 65lbs.
    • Previous Experience Required.
    • Available Shifts:
      • 1st Shift: 6:00am-2:00pm (Monday – Friday)
      • 2nd Shift: 2:00pm-10:00pm (Monday – Friday)
      • 3rd Shift: 10:00pm – 6:00am (Snday – Thursday)
      • Must be available for training on other shifts
      • Possible overtime of 8 hour shifts

 

  • Overhead Crane Operator
    • Job Duties: Understands and performs the loading of coils on coil carts and surrounding area. Understands the movements of cranes with or without loads.  Understands tow motor safety, receiving paperwork, shipping manifests, color coding coils, raw material tagging.  Generates manifests, and bar code labels.  Accuracy is a must.
    • Job Requirements: Previous experience required. Must be able to lift 65lbs.
    • Available Shifts:
      • 1st Shift : 5:00am–3:00pm (Monday – Thursday)
      • 2nd Shift: 3:00pm – 1:00am (Monday – Thursday)
      • Possible overtime of 8 hour shifts

 

  • CMM Programmer / Operator
    • Job Requirements: Must be able to utilize C++ and PC-DMIS Programming software and inspect parts.
    • Previous manufacturing experience preferred.  Must be able to lift 65lbs.
    • Available Shifts:
      • 2nd Shift: 3:00pm-1:00am (Monday – Thursday)
      • Must be available for training on other shifts
      • Possible overtime of 8 hour shifts

 

  • Quality Inspector
    • Job Duties: Performs inspections as required and accurately records on the appropriate forms
    • Job Requirements: Previous experience preferred. Must be able to lift 65lbs.
    • Available Shifts:
      • 2nd: 3:00pm – 1:00am (Monday – Thursday)
      • 3rd : 9:00pm–5:00am (Sunday – Thursday)
      • Will train on 1st shift from 5:00am–3:00pm
      • Possible overtime of 8 hour shifts

 

  • Maintenance
    • Job Duties: Fabricates or repairs to presses as needed, performs preventative maintenance on presses, feed lines, tow motors, and all other equiptment.
    • Job Requirements: Must understand how presses function, ability to read blueprints and electrical drawings. Previous experience required. Must be able to lift 65lbs.
    • Available Shifts: (Must be available for training on other shifts)
      • 2nd Shift: 2:00pm – 10:00pm (Monday – Friday)
      • 3rd Shift: 10:00pm – 6:00am (Sunday – Thursday)
      • Possible overtime of 8 hour shifts

 

  • Experienced Large Coil Fed Press Operator
    • Job Duties: Performs set ups, feed lines, follows safety & quality standards
    • Job Requirements: Basic math skills. Be able to communicate effectively. Must be able to lift 65lbs.  Previous experience required.
    • Available Shift:
      • 1st Shift: 5:00am – 3:00pm (Monday – Thursday)
      • 2nd Shift: 3:00pm – 1:00am (Monday – Thursday)
      • 3rd Shift: 9:00pm – 5:00am (Sunday – Thursday)
      • Possible overtime of 8 hour shifts

 

  • Robotic Welder
    • Job Duties: Work as a robotic welder.
    • Job Requirements: Previous robotic welding experience is required. Must be able to lift 65lbs.
    • Available Shifts:
      • 1st: 5:00am – 3:00pm (Monday – Thursday)
      • 2nd: 3:00pm – 1:00am (Monday – Thursday)
      • Possible overtime of 8 hour shifts

 

  • General Laborer
    • Job Duties: Packaging of parts, tow motor operation, assists with set-ups, and rework as needed.
    • Job Requirements: Previous manufacturing experience preferred. Must be able to lift 65lbs.
    • Available Shifts:
      • 1st Shift: 5:00am – 3:00pm (Monday – Thursday)
      • 2nd Shift: 3:00pm-1:00am (Monday – Thursday)
      • 3rd Shift: 9:00pm – 5:00am (Sunday – Thursday)
      • Possible overtime of 8 hour shifts

 

  • Quality Rework / Quality Laborer
    • Job Duties: Completes rework in a timely manner, follows directions, understands paperwork, safely operates a tow motor, understands customer concerns and the importance of visual inspection. Can use hand tools and work well with others.
    • Job Requirements: Previous experience preferred.  Must be able to lift 65lbs.
    • Available Shifts:
      • 1st Shift: 5:00am–3:00pm (Monday – Thursday)
      • Possible overtime of 8 hour shifts 

 

  • Tow Motor Driver
    • Job Duties: Forklift certified.
    • Job Requirements: Previous experience required. Must be able to lift 65lbs.
    • Available Shifts:
      • 1st Shift : 5:00am–3:00pm (Monday – Thursday)
      • 2nd Shift: 3:00pm – 1:00am (Monday – Thursday)
      • 3rd Shift: 9:00pm – 5:00am (Sunday – Thursday)
      • Possible overtime of 8 hour shifts

Ohio Valley Manufacturing operates in compliance with federal CAA laws and guidelines. See: Unified Group Services for more information.